Finisar Surveyor manual Detail View Toolbar

Surveyor

User’s Guide

Detail View Toolbar

Save button

Saves the current contents of the capture buffer to a file. A dialog box displays, allowing you to select the file name and directory.

Print button

Prints the contents of the current view.

Start button

Starts a module. The module captures or transmits packets, depending on the whether the mode is set to transmit or capture.

Stop button

Stops a module. The module ceases to capture packets or transmit packets.

Capture Mode button

Places the currently selected resource in capture mode. This button is gray if the resource is currently active (started).

Monitor Mode button

Activates the monitor functions for the currently selected resource. If the resource does not support monitoring functions, the resource is put into capture mode. This button is gray if the resource is currently active (started).

Cap+Disk Mode button

Places the currently selected resource in Cap+Disk mode. Captured data is automatically saved to disk. This button is gray if the resource is currently active (started).

Transmit Mode button

Places the currently selected resource in transmit mode. This button is gray if the resource is currently active (started).

Capture View button

Selects Capture View mode for viewing captured information. You can see protocol decodes in this view. Capture View has its own toolbar to allow you to select other view of captured information.

3-8