Finisar Surveyor manual Module Settings Properties, Hardware Device Properties

Configuring Surveyor 4

Module Settings (Properties)

Module Settings (Properties)

Module settings configure options for the capture, monitor, and transmit functions of devices. To configure modules, select Module Settings... from the Configuration menu. Tabs appear that apply to the currently active device type; a tab will only appear if this option can be set for the current device type. Hardware devices can have properties set according to Table 4-3 below:

Table 4-3. Hardware Device Properties

Hardware	Set	Packet	Stop-and-	Modes:	Modes:	Modes:	MAC
Device	Buffer	Slice	Save	Expert	Non-	M-QoS	Control
	Size		Capture	Mode	WKP	Only	Frame
THGm	NO	YES	YES	YES	YES#	YES	YES
THGs	NO	YES	NO	YES	NO	YES	YES
THGsE	NO	YES	NO	YES	NO	YES	YES
THGp	NO	YES	YES	YES	NO	YES	YES
Portable	YES	YES	YES	YES	YES#	YES#	NO
Surveyor 10/
100 Ethernet
Analyzer Card
NDIS	YES	YES	YES	YES	YES#	YES#	NO

#This option affects the display of tables for local devices only for 10/100 networks.

4-7