Finisar Surveyor manual Configuring a Multi-Port Tap or Switch

Configuring Surveyor 4

Configuring a Multi-Port Tap or Switch

The Surveyor software can be used to control which LAN segment is selected by the tap or switch. To set the LAN segment:

1.In the resource browser, click on the local or remote resource connected to the switch. The current port being monitored will display under the tap or switch resource. The example below shows a switch with the LAN Segment connected to port 5 selected.

2.Double-click on the tap or switch icon in the resource browser.

3.A list box appears showing the port-pairs on the tap or switch. You must know which LAN segments are connected to the port-pairs on the tap or switch. Use the radio buttons to select the LAN segment you wish to monitor. Only one LAN segment can be selected.

4-17