Finisar Surveyor manual H.323 Call Field Descriptions, Field Name Description

Surveyor

User’s Guide

	Table 11-8. H.323 Call Field Descriptions
Field Name	Description
Frame ID	Frame ID of the first frame from which the conversation was detected.
	This field is useful when doing post capture analysis. If there is a need
	for in-depth analysis of a specific call, the first frame associated with
	call can be quickly determined.
Source Reference Value	The Call Reference Value for the conversation used by H.225.0 on the
	source side.
Source Address	The IP address of the initiator of the call.
Source Q.931 Port	The Q.931 TCP port of the initiator of the call.
Source H.245 Port	The H.245 TCP port of the initiator of the call.
Source Number	Phone number of the initiator of the call.
Source Alias	An alias of the initiator of the call.
Source H.323 Ver	The version of H.323 being used by the initiator of the call.
Source Product	The product being used by the initiator of the call.
Product Version	The product version being used by the initiator of the call.
Start Time	Time at which the call was started.
Stop Time	Time at which the call was completed.
Setup Time (ms)	Time that was taken for the call to be setup (the time taken from the
	start of the call until the phone rings).
Destination Reference	The Call Reference Value for the conversation used by H.225.0 on the
Value	destination side.
Destination Address	The IP address of the receiver of the call.
Destination Q.931 Port	The Q.931 TCP port of the receiver of the call. This port has a default
	value of 1720.
Destination H.245 Port	The H.245 TCP port of the receiver of the call
Destination Number	Phone number of the receiver of the call.
Destination Alias	An alias of the receiver of the call.
Destination H.323 Ver	The version of H.323 being used by the receiver of the call.
Destination Product	The product being used by the receiver of the call.
Product Version	The product version being used by the receiver of the call.
Fast Start	Indicates whether or not Fast Start was used during call setup.
Release Code	Code indicating the status of the call when it was completed.

11-22