Finisar Surveyor manual Buttons and Toolbars

Getting Started 3

Buttons and Toolbars

Capture Mode button

Places the currently selected resource in capture mode. This button is gray if the resource is currently active (started).

Monitor Mode button

Activates the monitor functions for the currently selected resource. If the resource does not support monitoring functions, the resource is put into capture mode. This button is gray if the resource is currently active (started).

Cap+Disk Mode button

Places the currently selected resource in Cap+Disk mode. Captured data is automatically saved to disk. This button is gray if the resource is currently active (started).

Transmit Mode button

Places the currently selected resource in transmit mode. (Packet Blaster plug-in only)

Detail View button

Brings up Detail View for the currently active resource.

Load Filter button

Brings up a dialog box to select a saved capture filter (.CFD extension). If a capture filter is opened, that filter is applied to the currently selected resource. This button is gray if the resource is currently active (started).

Unload Filter button

If a filter is loaded for the currently selected module, pressing this button will unload it. This button has no function if the currently selected resource is in transmit or monitor only mode. This button is gray if the resource is currently active (started).

Transmit button

Brings up a dialog box to select a saved transmit specification (.TSP extension) or a capture file (.CAP extension) for transmit. This button has no function if the currently selected resource is in capture or monitor mode. This button is gray if the resource is currently active (started). (Packet Blaster plug-in only)

3-7