Finisar Surveyor manual Icmp Protocol Unreachable

Surveyor

User’s Guide

ICMP Protocol Unreachable

Counter

ICMP Protocol Unreachable events are counted in the ICMP All Errors and the ICMP Destination Unreachable counters. A count of all destination unreachable ICMP symptoms and a count of all ICMP errors displays in the Overview counters of Expert View. A threshold can be set in Expert Alarms for all destination unreach- able ICMP errors or for all ICMP errors.

Expert Symptom

ICMP Protocol Unreachable events are automatically logged as expert symptoms. The Symptom Summary field provides information about the IP addresses involved. For example:

Protocol=IP on [206.250.228.69] cannot be reached by

[206.250.228.11]. SA=[206.250.228.11] DA=[206.250.228.69]

Diagnostic Details

__________________________________________________________________

Problem Description:

An ICMP Destination Protocol Unreachable message has been sent.

__________________________________________________________________

Probable Cause(s):

1.If a router has a routing table problem, it may send this message.

2.A host may send this message if a protocol is unreachable.

3.The source may have an incorrectly configured subnet mask.

__________________________________________________________________

Recommended Actions:

1.Check the routing tables of the router that this message was generated from.

2.Check the netmask configuration of the source.

3.Ignore this message if the protocol is truly unreachable (no action required).

10-82