Finisar Surveyor manual

Surveyor

User’s Guide

The following steps describe how to create two filter templates, logically combine them using an OR operator, and load the resulting Template Combination to a resource:

1.Select the HTTP pre-defined filter template from the Available Filter Templates box.

2.Press the Name button for Station Address 1. Select the address from the name table and click OK.

3.Pull down the Direction box and set the indicator to source address (->).

4.Be sure the Apply Conversation to Template check box is selected in the Add

Conversation to Filter Template area.

5.Press the Save Custom Template button.

6.Enter the name (HTTP_Activity_Station2) of the new filter template in the Add to Available Filter Templates dialog box. The new filter template name will

appear in the Custom_Templates available for other filtering operations.

7.Using the FTP pre-defined filter template as the starting point, repeat steps 1 through 6 to create a similar custom template for FTP.

8.Highlight the HTTP_Activity_Station2 template in the Custom_Templates section of the Available Filter Templates box. Press the Add button to apply the filter template. The filter template appears in the Template Combination box.

9.Press the OR operator button. The operator is appended to the filter template in the Template Combination box.

10.Highlight the FTP_Activity_Station2 template in the Custom_Templates section of the Available Filter Templates browser. Press the Add button to apply the filter template. The filter template appears in the Template Combination box. You now have two filter templates in the Template Combination box connected by an OR operator.

11.Press the Load Filter button to load the filter to the resource.

12.You are now ready to start capture. The capture buffer will contain only the packets sent from Station2 that have an FTP or HTTP port number.

7-26