Finisar Surveyor manual Transmitting Capture Files, Transmit Specification Examples

Surveyor

User’s Guide

Transmitting Capture Files

You can transmit the contents of a capture file as one of the streams in the Transmit Specification. Place a capture file as a stream into the Defined Streams list box using the Add File… button.

The entire contents of the capture file is transmitted with timestamps intact. As with any other stream, you can repeat transmission by using the Repeat Stream field. All other fields do not apply when the stream is defined by a capture file.

Transmit Specification Examples

Transmit Specification examples are supplied with Surveyor. Open a transmit specification file (..\transmit subdirectory, .TSP extension) from the Transmit Specification dialog box to see examples.

Two Transmit Specification examples are shown in the following sections.

•The Packet Gaps example shows a specification made up of several streams with different packet sizes that use packet gaps.

•The Bursts example shows a stream that uses bursts.

To find examples, look in the ..\examples\transmit directory.

8-12