Finisar Surveyor manual Expert View Expert plug-in only, Multi-QoS View Multi-QoS software only

Surveyor

User’s Guide

Expert View (Expert plug-in only)

From Detail View, click on the button to open a window with Expert View. From Summary View, set the view preferences to Expert View to see this view in the first tab.

Multiple tables are available in Expert View. Select a layer on the left and tab on the bottom to create the view you want. Expert View is not available as a chart. Refer to the chapter on the Expert System for complete information on Expert Views.

Application Response Time View (Expert plug-in only)

From Detail View, click on the button to open a window with Application Response Time View. From Summary View, set the view preferences to Application Response Time View to see this view in the first tab.

Application Response Time View is available as a table showing connection time and connection number information about application protocols. Application response time view is not available as a chart. Use this table if you want to find out which applications are responding very slowly in the network.

Table 6-20. Application Response Time View, Column Descriptions

Table Column	Description
Server Name	Name or IP address of the transmitting server.
Protocol	Name of the application protocol discovered
Minimum Time	Shortest time taken for the application to make a connection
Maximum Time	Longest time taken for the application to make a connection
Average Time	Average time taken for the application to make a connection
Connections	Number of connections processed for this application

To calculate application response time, Surveyor causes a stimulus packet to be transmitted so the application layer round trip time can be assessed. However, the packet cannot be sent if the analyzer device used by Surveyor is connected through a tap device.The application response time will only work if the transmit port of the analyzer is directly connected to a switch port or device.

Multi-QoS View (Multi-QoS software only)

From Detail View, click on the button to open a window with Multi-QoS

views. Initially, the All Calls table displays. Multi-QoS views are not available from Summary View.

6-36