Nokia 3570 manual Disconnect first party, Send OWN Caller ID When Calling, Store the feature codes

En3570.book Page 90 Wednesday, September 11, 2002 3:08 PM

Disconnect first party

If you wish to disconnect with the first party and remain connected to the second party, have the first party terminate the call on his/her end.

• SEND OWN CALLER ID WHEN CALLING

This feature allows you to block caller ID when you call someone (your number will not be displayed on their caller ID). This feature may only be effective when calling a number equipped with caller ID.

Note: This feature is available only when supported by the wireless network and may not function if you are roaming.

Important: This feature works on a call-by-call basis. You must enable this feature each time you want to block the sending of your own number to the recipient’s caller ID.

Store the feature codes

Before you can use the Send own caller ID when calling feature, you must store the feature codes for activating this feature. Once the code is stored in your phone, it is sent automatically to the network when you select this option from your phone’s menu.

1Press Menu 4-6-5 (Settings > Network services > Network feature setting). The Feature code field appears after a few seconds.

2Enter the feature code your service provider gave you (example *67 for activating Send own caller ID when calling), then press OK.

3Select No to assign the activation code.

[ 90 ]