[ 14 ]
• ABOUT THE BATTERYInstall the battery
Warning! Use only the BLC-2 battery in this Nokia phone.
If your dealer has already installed the battery, please see “Charge the
battery” on page 15.
1Remove the back cover of the
phone by pressing and holding
the release button while sliding
the cover upward toward the top
of the phone. Set the back cover
aside.
2Place the battery in the compartment
with the label side facing up and the
metal contacts aligned with the
contact prongs. Snap the battery into
place.
3Replace the cover by sliding it
carefully over the whip antenna
downward until you hear a click.
En3570.book Page 14 Wednesday, September 11, 2002 3:08 PM