[ 89 ]
Advanced features
End the active call
To end the active call, simply allow the other party to hang up; the call on
hold then becomes the active call. OR:
1Press to terminate the active call.
2The network redials your phone with the call on hold. Answer this as
you would any normal incoming call.
• MAKE A CONFERENCE CALL
This feature allows you to talk to two people at the same time. Conference
calling is a network-dependent feature.
Note: Check with your service provider to make sure this service
is available in your network.
1Make a call to the first participant as usual. When you’re ready to
place a call to the next party,
2Press Options, then press New call.
3Enter the number and press (or press Search to recall the
number from the phone book).
4Press again to connect both parties.
5To end the call, press . This action disconnects both parties.
End calls
To end a conference call (disconnect with all callers), press . Or you
can also press Options, then select End all calls.
Disconnect second party
While all three parties are connected, pressing the key disconnects
the second caller, keeping the first party’s call active.
En3570.book Page 89 Wednesday, September 11, 2002 3:08 PM