Finisar Surveyor manual Configuring Remote Communications, RSP Time Out value

Configuring Surveyor 4

System Settings

2.A dialog box appears showing the ports within the local system. Check the box of only those ports you want Surveyor to scan for an analyzer card.

3.Click the OK button.

Configuring Remote Communications

The remote server protocol (RSP) is used to control the interface for connecting with remote systems. You configure the options that effect connection time outs, encryption of control packets, and auto-discovery of resources.

To configure remote communications, select System Settings… from the

Configuration menu. Select the Remote Communications tab.

Table 4-5. Remote Communications Tab Functions and Default Settings

Tab Selection	Description
Encrypt RSP Packets check box	Select encryption if there is a need for security in the network
	when transferring packets between the remote resource and
	the local system.
	The default setting is Not Selected.
No Autodiscovery check box	Select this box to prevent auto-discovery of remote resources.
	If selected, you will only be able to access remote resources by
	manual discovery of resources using the Connect option from
	the Host menu. This box can be selected when working with
	only local resources to eliminate viewing all resources in the
	Resource Browser. The auto-discovery of resources may take
	some time, especially in a large network.
	The default setting is Not Selected
RSP Time Out value	Specifies, in seconds, how long the protocol waits before drop-
	ping a connection when the remote resource is not responding.
	The value must be between 1 and 30 seconds.
	The default setting is 10 seconds.

4-11