Finisar Surveyor manual Histogram Display, Large Capture Example, Histogram Default Colors

Views 6

Using the Histogram Control

shown in black. The gray and black colors indicate that these sections are not downloaded.

Figure 6-3. Histogram Display, Large Capture Example

Once you press the download button, the colors will change and the decodes for the Selected Section in the Upper Histogram are loaded into the Summary area. Immediately after downloading, the histogram shows only the colors listed in the left hand column below, as the Selected Section and the Current Section will match.

Colors listed in the table below are the default values. All colors can be changed.

Table 6-4. Histogram Default Colors

Color When Part of the	Color When NOT Part of
Capture Selection or	the Capture Selection or
Capture Detail Window	Capture Detail Window	Meaning of the Color in the Histogram Display
Purple	Magenta	Currently decoded sections of the capture.
		These are the sections that are decoded
		within the Summary area.
Green	Bright Green	Sections of the capture currently in the disk
		cache on your local system that are not cur-
		rently decoded.
Gold, Yucca	Bright Yellow	Sections no longer in the cache. These sec-
		tions are highlighted in a unique color so you
		can see sections that you have looked at in
		the past.
Maroon	Bright Red	Any sections of the capture that are unavail-
		able or lost. Red sections could result from a
		lost connection during capture. Red sections
		could also result from missing files if you are
		looking at a capture you have saved to your
		local disk.

6-13