Finisar Surveyor manual Installing More Than One Analyzer Card in a Notebook PC

Surveyor

User’s Guide

5.To update the device driver, click with the right mouse on My Network Places. Select Properties from the menu.

6.Double-click on Local Area Connection. The Racore device driver should appear in the Connect box.

7.Press Configure and then select the Device Driver tab.

8.Press Update Driver.... The Upgrade Device Driver Wizard displays. Click the

Next button to continue.

9.Select the Display a list of the known device.... radio button and then click Next.

10.Click the Have Disk... button. The Install from Disk window appears.

11.Insert the Surveyor CD in the CDROM drive.

12.Use the Browse... button to find the Ethernet Driver (<CDROM-drive- letter>\drivers) directory on the Surveyor CDROM and click OK.

13.The Update Device Driver window will appear. Select the “Finisar 10/100 Ethernet Analyzer Plug_Play” driver. Click the Next button.

14.Click the Next button again when the next window appears. The system will display the Digital Signature Not Found dialog box. Click Yes. (Note: You can safely ignore the warning message. The message appears because Windows 2000 does not recognize the card properly at this time.)

15.The Finisar driver will be copied to the hard drive. Windows 2000/XP may request the Windows CDROM to install system files. Many of these system files can be found directly on the hard drive in the C:\windows\system and C:\windows directory without using the CDROM.

16.To verify that the analyzer card is properly installed, open the System folder in the Control Panel. Go to the Hardware tab in the System Properties window. Select the Device Manager. If no error marks exist through the Network icon, the installation is complete. If an error exists, highlight the problem adapter and press the Remove button. Reboot the notebook computer and attempt the installation again. If the problem persists, contact Technical Support.

17.Reboot your system.

Installing More Than One Analyzer Card in a Notebook PC

If you are installing two Portable Surveyor 10/100 Ethernet Analyzer Cards, install one card, make sure it works within Surveyor, and then install the second card.

2-8