Finisar Surveyor manual Default Display Timer Settings, Display Timer Default Value

		Configuring Surveyor	4
		System Settings
:		Table 4-6. Remote Polling Timers
	Polling Timers	Description
	MAC Layer Counters	Sets the interval for polling devices for MAC layer counters.
	Protocol Distribution	Sets the interval for polling devices for the protocol distribution information.
	Host Table	Sets the interval for polling devices for MAC layer host table information.
	Matrix Views	Sets the interval for polling devices for information on MAC, network, and
		application layer conversations.
	Expert Data	Sets the interval for polling devices for expert data.
	Remote Name Table	Sets the polling interval for refreshing the local copy of the name table for
		a remote resource.
		Table 4-7. Strip Chart Display Timers
	Display Timers	Description
	Strip Chart Display	Sets the time between refreshing counters in strip charts for resources in
	Timer, Local	the local PC. This display timer is available for strip charts only.
	Strip Chart Display	Sets the time between refreshing counters in strip charts for resources in
	Timer, Remote	remote hosts. This display timer is available for strip charts only.

The values for polling timers must be between 1 and 214783647 seconds. The values for the display timers must be between 1 and 214783647 seconds. The strip chart display timers must be in multiples of the MAC Layer Counter timer. The default settings, in seconds, are shown in Table 4-8:

	Table 4-8. Default Display Timer Settings
Display Timer		Default Value
MAC Layer Counters		3
Protocol Distribution		5
Host Table Views		7
Matrix Views		10
Expert Data View		15
Remote Name Table		300
Strip Chart, Local		1
Strip Chart, Remote		3

4-13