Finisar Surveyor manual Multi-QoS

Multi-QoS 11

Channel Table Details

Table 11-11. H.323, SIP, or UNKNOWN Channel Table Column Descriptions (continued)

Max Jitter (ms)	Maximum Jitter in milliseconds. The value is calculated by Surveyor.
	Surveyor uses the formula described in RFC 1889 to calculate jitter.
Low Seq Num	Lowest Sequence Number. Lowest RTP sequence number seen.
High Seq Num	Highest Sequence Number. Highest RTP sequence number seen.
RTCP Packet Count	Real-time Transport Control Protocol (RTCP) Packet Count.
RTCP Byte Count	RTCP Byte Count.
RTCP RTP Packet	RTCP reported RTP Packet Count.
Count
RTCP RTP Byte Count	RTCP reported RTP Byte Count.
RTCP Jitter (ms)	RTCP reported jitter. Average reported RTCP interarrival jitter.
RTCP Min Jitter (ms)	RTCP reported minimum jitter. Minimum reported interarrival jitter.
RTCP Max Jitter (ms)	RTCP reported maximum jitter. Maximum reported interarrival jitter.
RTCP High Seq Num	High Sequence Number reported by RTCP.
RTCP Sender Report	Number of RTCP Sender Reports seen.
Count
RTCP Receiver Report	Number of RTCP Receiver Reports seen.
Count
RTCP Source Descrip-	Number of RTCP Source Descriptions seen.
tion Count
RTCP Goodbye Count	Number of RTCP Goodbyes seen.
RTCP Application-	Number of RTCP Application Definitions seen.
Defined Count
RTCP Unknown Report	Count of all other RTCP reports seen.
Count
RTCP CName	Canonical Name. (RTCP Source Description, CNAME field)
RTCP Name	User’s Name. (RTCP Source Description, NAME field)
RTCP Email	User’s electronic mail address. (RTCP Source Description, EMAIL
	field)
RTCP Phone	User’s phone number. (RTCP Source Description, PHONE field)
RTCP Location	User’s geographic location. (RTCP Source Description, LOCATION
	field)
RTCP Tool	Name of application or tool. (RTCP Source Description, TOOL field)
RTCP Note	Notice about the source. (RTCP Source Description, NOTE field)

11-27