Panasonic RR-US570 Setting the time, Preparation, When “, ” is blinking, When the time display is

Setting the time

When the power is turned on, “” blinks on the display when the time is not set (e.g. at the time of purchase). (In power-on condition, the display changes to “” (blinking) in approx. 1 minute.)

The clock is used for preserving recording date. Please set the time first.

Recording is possible even if the clock is not set. However, the Recording date, Recording start time will be displayed as “”.

• MENU/ REPEAT	When “		” is blinking			When the time display is
						“	” (blinking) or you change
	• Turn the power on (➜ page 6).
						the time
STOP	1	Press q/g .
						• Turn the power on (➜ page 6).
	2	Press +, – to set the year and
		press q/g to enter.				• Press STOP			to stop the unit.
		Set month and day in the same way.				1 Press • MENU/ REPEAT .
							“		” (blinking) or “	” (blinking)
		Year	Month		Day		is displayed.
		The above illustration is a display example.				2 Press +, – to select “				”
		Press u, i to select the time
							and press q/g to enter.
	3 display and press q/g to enter.
							If “		” blinks, press q/g to enter.
						3	Follow step 2 , 3 and 4
		24-hour display		12-hour display			shown at left.
		Press +, – to set the time and						STOP
	4 press q/g to enter.					*Press			to stop the setting process
						midway.
		You can adjust the time quickly by
						*The clock operates with the monthly
		pressing and holding +, –.				loss/gain of approx. 60 seconds at
						normal temperature.
						*The time setting is cleared, if the battery
		24-hour display		12-hour display		has been consumed completely.

Preparation

RQT9358

7