Panasonic AWHE60HE, AWHE60SN, AWHE60HN Setting/releasing the limiters, WwReleasing the limiters

Setting/releasing the limiters (continued)

wwReleasing the limiters

The limiter positions that are set can be released by following the steps below.

When the position is released, the tally lamp blinks twice.

1Press one of the [CAM1] to [CAM4] buttons to select the unit.

2Release the limiters by taking the steps below.

ppReleasing the upper limit position of the movement range

Perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

ppReleasing the lower limit position of the movement range

Perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

ppReleasing the left-most limit position of the movement range

Perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

ppReleasing the right-most limit position of the movement range

Perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

wwResetting the limiters

To reset the limiters, the currently established settings must be released.

The limiter positions that are set can be reset by following the steps below.

1Release the settings of the limiter positions to be reset by following the steps in “Releasing the limiters”.

2Set the limiter positions by following the steps in “Setting the limiters”.

103