Panasonic AWHE60HN, AWHE60SN, AWHE60SE, AWHE60HE manual  Speed With Zoom POS,  Focus ADJ With PTZ

Controls and settings from web screen (continued)

Brightness

Use this to make the image darker. It does not work during automatic adjustments.

Use this to make the image lighter. It does not work during automatic adjustments.

Use this to switch the picture brightness adjustment between auto and manual.

Speed With Zoom POS.

“Off” or “On” is set here for the function used to adjust the pan-tilt adjustment speed in conjunction with the zoom magnification.

Off	The panning and tilting operations will not
	become slower in the zoom status.
On	The panning and tilting operations will
	become slower in the zoom status.

This function has no effect during preset operations.

Control pad and its buttons

To adjust the image in the horizontal or vertical direction (panning or tilting), left-click the pad and the buttons.

The more the outside of the pad is clicked, the faster the camera operates. Adjustment is also possible by dragging the mouse.

Right-click the pad to initiate zooming and focusing.

When the top half of the pad is clicked in the up or down direction, the zoom (magnification) is adjusted in the Tele direction; conversely, when the bottom half of the pad is adjusted, the zoom is adjusted in the Wide direction.

When the left half of the pad is clicked in the left or right direction, the focus is adjusted in the Near direction; conversely when the right half of the pad is adjusted, the focus is adjusted in the Far direction.

The zooming can also be adjusted by operating the mouse wheel.

Note

ppWhen the mouse is used for dragging and dropping from the control pad area to a position outside this area, the panning, tilting and other operations will not stop.

In a case like this, click the control pad area to stop these operations.

Speed

Use this to select the speed at which the pan, tilt, zoom and focus operations are to be performed.

Focus ADJ With PTZ.

“Off” or “On” is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations.

Off	Out-of-focusing is not compensated.
On	Out-of-focusing is compensated.

When “Off” is set, adjust the focus as required after zooming or set the focus to the auto mode.

This item can be selected only when “Manual” has been selected as the “Focus Mode” setting.

77