Panasonic AWHE60HN, AWHE60SN, AWHE60SE Host auth. screen  Host auth  Access level,  Host check

Controls and settings from web screen (continued)

Host auth. screen

 Host auth.	 Access level
<Initial setting: Off>	<Initial setting: 3. Live only>
Host authorization is set to “On” or “Off” here.	Select one of the following settings as the host access
	level.

IP address

<Initial setting: blank>

The IP address of the personal computer from which access to the camera is allowed is input here.

The host name cannot be input as the IP address.

ppWhen the “IP address/subnet mask length” is input, the personal computers which are allowed to access the camera can be restricted on a subnet by subnet basis. If, for instance, “192.168.0.1/24” has been input and the “2. Camera control” setting has been selected as

the access level setting, the personal computers from “192.168.0.1” to “192.168.0.254” will be able to access the camera at the “2. Camera control” access level.

ppWhen an already registered IP address is input and the Set button is clicked, the host information will be overwritten.

1.Administrator

2.Camera control

3.Live only

For details on the access level, refer to page 84.

Host check

A pull‑down menu can be opened here, and the IP addresses of the registered hosts checked.

A host is indicated in the form of “Registered IP address [Access level]”.

(Example: 192.168.0.21 [1])

To delete a registered host (IP address), select the host to be deleted, and click the Delete button on the right.

85