Panasonic AWHE60SE QqManual adjustment Gain and B gain adjustment, When the AW‑RP555 is connected

White balance adjustment (continued)

qqManual adjustment

(R gain and B gain adjustment)

White balance can be adjusted manually.

When performing the operations using the wireless remote control

ppSteps 1 through 6 represent the procedure for selecting the “AWB A” or “AWB B” memory. They need not be taken if a selection has already been made.

1 Select Manual1, Manual2 or Manual3 as the shooting mode by following the procedure in “Selecting the shooting modes (scene files)” (page 11).

Camera

SceneManual1

Contrast

Picture

Color Matrix

Return

2Press the [] or [] button to bring the cursor to “Picture”.

3Press the [] button.

The “Picture 1/2” sub‑menu is displayed.

	Picture	1/2
Chroma Level			0
AWB	Mode		AWB A
R	Gain		0
B	Gain		0
Detail			High
Flesh Tone		Mode	Off
DNR			High

Return

4Press the [] or [] button to bring the cursor to “AWB Mode”.

5Press the [] button.

“AWB Mode” starts blinking.

6Press the [] or [] button to change the AWB mode to be used to “AWB A” or “AWB B”, and press the [] button to enter the selection.

7Press the [] or [] button to bring the cursor to “R Gain” or “B Gain.”

8Press the [] button to make the “R Gain” or “B Gain” value blink.

9Press the [] or [] button to change the “RGain” or “BGain” numerical value, and press the [] button to enter the setting.

When performing the operations using the controller

When the AW‑RP655 is connected:

1Press the [R/B GAIN/PED] button several times so that the “GAIN” item is displayed on the LCD panel.

2Adjust the R Gain value using the jog dial (L).

3Adjust the B Gain value using the jog dial (R).

When the AW‑RP555 is connected:

Refer to the Operating Instructions of the controller.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

26