Panasonic AWHE60HN manual Shooting, QqChanging the camera’s direction, QqUsing the zoom function

Shooting

When performing the operations using the wireless remote control

qqChanging the camera’s direction

Moving the camera toward the left or right (panning): Press the [] or [] button.

Moving the camera up or down (tilting):

Press the [] or [] button.

Moving the camera diagonally:

Press the [] or [] button and [] or [] button at the same time.

Returning the camera to the reference position:

Press the [HOME] button for 2 seconds.

When performing the operations using the controller

qqChanging the camera’s direction

Moving the camera toward the left or right (panning):

Tilt the [PAN/TILT] lever toward L or R.

Moving the camera up or down (tilting):

Tilt the [PAN/TILT] lever toward UP or DOWN.

Moving the camera diagonally:

Tilt the [PAN/TILT] lever diagonally.

Returning the camera to the reference position: If the controller has a [HOME] button, press the [HOME] button.

qqUsing the zoom function

Zooming in (the subject becomes magnified in size): Press the [T] button of [ZOOM].

Zooming out (the subject becomes reduced in size): Press the [W] button of [ZOOM].

qqSwitching the direction or zoom speed

Changing the direction or zoom at high speed: Press the [FAST] button.

When this button is held down, the speed can be set to an even higher speed.

When it is tapped, the normal speed (high speed) is restored.

Changing the direction or zoom at low speed: Press the [SLOW] button.

When this button is held down, the speed can be set to an even lower speed.

When it is tapped, the normal speed (low speed) is restored.

The lens focus control speed is also changed at the same time.

qqUsing the zoom function

Zooming in (the subject becomes magnified in size):

Tilt the [ZOOM] lever toward the TELE direction.

Zooming out (the subject becomes reduced in size): Tilt the [ZOOM] lever toward the WIDE direction.

Note

ppThe indicator displays of the AW‑RP655 are indicators that show the positions of the optical zoom. They will not work for electronic zooming.

qqChanging the direction or zoom speed

AW‑RP655 and AW‑RP555

1Press the [SPEED] button.

Each time the [SPEED] button is pressed, the control speed is switched between the high speed (the button’s lamp is off) and low speed (the button’s lamp is lighted). The lens focus control speed is also changed at the same time.

AW‑RP50

Refer to the Operating Instructions of the controller.

13