Panasonic AWHE60SE, AWHE60SN, AWHE60HN Setting/releasing the limiters, WwBasic limiter operations

Setting/releasing the limiters

wwBasic limiter operations

1Press the [MENU] button.

Tap the button (rather than pressing it).

When it is pressed for 2 seconds, the camera menu will appear.

If this happens, press the [MENU] button again for

2 seconds to clear the camera menu. Then start again from step 1.

2Press the [], [], [] or [] button for 2 seconds while holding down the [PRESET] button.

The limiter for the upper limit, lower limit, left limit or right limit is set (or released) using these direction buttons, respectively.

The tally lamp will blink at this time.

When a limiter is set, it blinks once; when a limiter is

released, it blinks twice.

If any other button was operated between steps 1 and 2, start again from step 1.

wwSetting the limiters

The limiter positions can be set by following the steps below. When the position is set, the tally lamp blinks once.

1Press one of the [CAM1] to [CAM4] buttons to select the unit.

ppSetting the upper limit position of the movement range

Press the [] or [] button of the wireless remote control to turn the unit as far as the position which will serve as the upper limit.

Next, perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

ppSetting the lower limit position of the movement range

Press the [] or [] button of the wireless remote control to turn the unit as far as the position which will serve as the lower limit.

Next, perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

ppSetting the left-most limit position of the movement range

Press the [] or [] button of the wireless remote control to turn the unit as far as the position which will serve as the left-most limit.

Next, perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

ppSetting the right-most limit position of the movement range

Press the [] or [] button of the wireless remote control to turn the unit as far as the position which will serve as the right-most limit.

Next, perform the steps in “Basic limiter operations”. (Press the [MENU] button quickly and then press the [] button for 2 seconds while holding down the [PRESET] button.)

102