Preset memories (continued)

When performing the operations using the controller

When the AWRP655 is connected:

Up to 50 settings can be registered and called.

The [1] to [50] buttons of [TRACING/PRESET MEMORY] correspond to the unit’s preset memories No.1 to No.50.

qqRegistering the settings in the preset memories

1Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2Set to the memory recording mode.

Press the [M.LOCK] button to turn off its lamp.

3Display the picture to be shot on the monitor.

Operate the [PAN/TILT] lever and [ZOOM] lever to determine the camera angle.

Adjust the focus, iris, gain and white balance if they need to be adjusted.

4Hold down the [MEMORY] button.

The buttons among the [1] to [50] buttons of [TRACING/ PRESET MEMORY] in which settings can be registered now start blinking in sequence.

ppPreset memory settings cannot be registered in buttons whose lamps are off (since they contain tracing memory settings).

5With the [MEMORY] button still held down, press the button of the preset memory number in which the setting is to be registered.

qqCalling the settings of the preset memories

1Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2Press the button among the [1] to [50] buttons of [TRACING/PRESET MEMORY] in which the setting was registered.

qqErasing preset memory settings

1Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2Set the memory recording mode.

Press the [M.LOCK] button to turn off its lamp.

3Hold down the [RESET] button.

The buttons among the [1] to [50] buttons of [TRACING/ PRESET MEMORY] whose settings can be erased now start blinking in sequence.

ppThe settings for the buttons whose lamps are off cannot be erased (since they contain tracing memory settings).

4With the [RESET] button still held down, press the button of the preset memory number whose setting is to be erased.

21

Page 21
Image 21
Panasonic AWHE60HN, AWHE60SN, AWHE60SE manual Preset memories, Set to the memory recording mode, Hold down the Memory button