Preset memories (continued)

When the AWRP555 is connected:

Up to 10 settings can be registered and called.

The [1] to [10] buttons of [PRESET] correspond to the unit’s preset memories No.1 to No.10.

qqRegistering the settings in the preset memories

1Display the picture to be shot on the monitor.

Operate the [PAN/TILT] lever and [ZOOM] lever to determine the camera angle.

Adjust the focus, iris, gain and white balance if they need to be adjusted.

2Hold down the [MEMORY] button.

The buttons among the [1] to [10] buttons of [PRESET] in which settings can be registered now start blinking in sequence.

3With the [MEMORY] button still held down, press the button of the preset memory number in which the setting is to be registered.

qqCalling the settings of the preset memories

1Press the button among the [1] to [10] buttons of [PRESET] in which the desired setting was registered.

When the AWRP50 is connected:

Refer to the Operating Instructions of the controller.

22

Page 22
Image 22
Panasonic AWHE60SE, AWHE60SN, AWHE60HN, AWHE60HE manual When the AW‑RP555 is connected