Panasonic AWHE60HN, AWHE60SN, AWHE60SE, AWHE60HE manual Mode button lights up at the BAR setting

Basic operations (continued)

wwControl exercised from the Multi Hybrid Control Panel AW‑RP555

Each time the [GAIN] button is pressed, the setting is switched in the sequence of GAIN AUTO  0dB  L (9dB)  H (18dB), and the mode is displayed by the LEDs as shown below.

[ON: LED lights; OFF: LED off]

	GAIN	MANU L	MANU H
	button	LED	LED
AUTO	ON	OFF	OFF
0dB	OFF	OFF	OFF
LOW	OFF	ON	OFF
HIGH	OFF	OFF	ON
Others	OFF	ON	ON

Each time the [MODE] button is pressed, the setting is switched between CAM and BAR.

The [MODE] button lights up at the BAR setting.

For executing AWB. *1, *2

The unit does not have an ABC function.

For switching the SCENE file (FullAuto, Manual1 to 3).

For operating the camera menus.

MENU: This operates in the same way as MENU on the camera.

ITEM: This operates in the same way as ENTER on the camera.

YES: This operates in the same way as UP on the camera.

For selecting the cameras to be operated.

For switching the contrast mode. *3

Shutter mode selection

Each time this button is pressed, one of the shutter modes set by the controller or “shutter OFF” is selected.

The [SHUTTER] button lights up in all modes except shutter OFF.

The shutter mode settings established by the [PRESET] buttons are as follows.

MODE	PRESET	MODE	PRESET
	No.		No.
1/100**1	PRESET1	1/4000	PRESET6
1/120**2		1/10000	PRESET7
1/250	PRESET2	SYNCHRO-	PRESET8
1/500	PRESET3	SCAN
1/1000	PRESET4	ELC	PRESET9
1/2000	PRESET5	OFF	PRESET10

**1: “1/100” when 59.94 Hz is selected as the frequency setting of the AW‑HE60.

**2: “1/120” when 50 Hz is selected as the frequency setting of the AW‑HE60.

For switching WHITE BAL A, B or ATW. *4

NO: This operates in the same way as DOWN on the camera.

This is used to switch between the Day mode and Night mode.

Each time the [(AF)EXT] button is pressed, the focus setting is switched between auto focus and manual focus.

When auto focus is selected, the [(AF)EXT] button lights.

When the focus setting is switched between auto focusing and manual focusing by the camera, the resulting status (lamp on or off) will not be reflected in the button.

*1: The lamp of the AWC switch flashes while automatic	*3:	The contrast level can be adjusted in the AUTO
white balance is being executed.		mode.
When AWB is completed successfully, the lamp	*4:	There is a delay in the switching of the display when
goes off; when it is not completed successfully, it		the settings are changed on the camera.
lights up.
*2: The switch lights without AWB being executed when
the white balance mode of the main unit is ATW, or
when the Color Bar is being displayed.

37