Panasonic AWHE60HN, AWHE60SN, AWHE60SE, AWHE60HE manual  Other, Install Position Desktop, Hanging

Controls and settings from web screen (continued)

Other

This item’s setting is reflected when the Set button is pressed.

Install Position [Desktop, Hanging]

“Desktop” or “Hanging” is selected here as the method used to install the unit.

Desktop	Stand-alone installation
Hanging	Suspended installation

When “Hanging” has been selected, the top, bottom, left and right of the images will be reversed, and up/down/left/right control for panning and tilting will also be reversed.

Preset Speed [1 to 30]

There are 30 preset pan-tilt operation speeds when regenerating the camera direction and other information which are registered in the preset memory.

Notes

ppIf a high value is selected for the Preset Speed setting, the image on the screen may shake when

operation stops.

ppWhen connecting the unit to the AW‑RP655 for use, the “DIAGONAL SPEED (P/T SETTING)” setting of the AW‑RP655 takes effect.

To change the Preset Speed, change the AW‑RP655 setting.

Preset Scope [Mode A, Mode B, Mode C]

Selected here are the setting items to be recalled when the contents of the preset memory are regenerated.

Mode A	Pan, Tilt, Zoom (including digital zoom),
	Focus, Iris, Gain, White-BAL
Mode B	Pan, Tilt, Zoom (including digital zoom),
	Focus, Iris
Mode C	Pan, Tilt, Zoom (including digital zoom), Focus

Digital Zoom [Disable, Enable]

“Enable” or “Disable” is set here for the digital zoom function.

If zooming is performed toward the Tele end beyond the maximum position when “Enable” has been selected, the digital zoom can be operated continuously. Zooming will stop temporarily at the position where the optical zoom and digital zoom are switched so after it has stopped at this position, proceed with zooming again.

When the setting is changed to “Disable” while already in the digital zoom region, the zoom will automatically move to the maximum position of the optical zoom.

Note

ppThe digital zoom is set to off when color bars are displayed during digital zooming.

Speed With Zoom POS. [Off, On]

“Off” or “On” is set here for the function used to adjust the camera direction’s adjustment speed in conjunction with the zoom magnification.

When “On” is set, the panning and tilting operations will become slower in the zoom status.

This function has no effect during preset operations.

Focus Mode [Auto, Manual]

“Auto” or “Manual” is set here for the focusing function.

Auto	The subjects are always brought into focus
	automatically.
Manual	The focus is operated manually.

Focus ADJ With PTZ. [Off, On]

“Off” or “On” is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations at the manual focus setting.

When “Off” is set, adjust the focus as required after zooming or set the focus to the auto mode.

This item can be selected only when “Manual” has been selected as the “Focus Mode” setting.

Tally Enable [Disable, Enable]

“Enable” or “Disable” is set here for the function which turns on or turns off the tally lamp using the tally control signal.

81