Panasonic AWHE60HE, AWHE60SN, AWHE60HN, AWHE60SE manual Controls and settings from web screen

Controls and settings from web screen

With a personal computer connected to the unit, it is possible to view the camera’s IP videos or select various settings from the web browser screen.

The LAN crossover cable is used when connecting a personal computer directly to the unit’s LAN connector for IP control, and the LAN straight cable is used when making the connection through a switching hub.

Select an IP address for the personal computer within the private address range while ensuring that it is different from the address of the unit.

Set the subnet mask to the same address as the unit.

Notes

ppIf you need to change the IP address and subnet mask, be sure to ask your dealer to make these changes for you.

Unit’s IP address and subnet mask (factory settings) IP address: 192.168.0.10

Subnet mask: 255.255.255.0 Range of private addresses:

192.168.0.0 to 192.168.0.255

ppIf the controller and web browser are being used at the same time, the content selected using the controller may not be reflected on the web browser display. When using both the controller and web browser,

be absolutely sure to check the settings using the controller or camera menu.

For details of the required personal computer environment, refer to page 4.

ppSome functions on the web setting screen can be used only from a personal computer which is running Windows. (They cannot be used from a personal computer which is running Mac OS X.)

Functions which can be used by Windows only are

indicated using the mark.

ppThe “Network Camera View4” plug-in viewer software must have already been installed in order to display the unit’s IP videos using a personal computer which is running Windows.

(This is not required for a personal computer which is running MAC OS X.)

For further details, refer to “Plug-in viewer software (Network Camera View4)” (page 41 in the <Basics>).

55