Icom IC-7000 Setting a memory channel as a select memory, Selecting a memory bank

MEMORY OPERATION 8

DSetting a memory channel as a select memory

Select memory channels are used for select memory scan. Select memory scan repeatedly scans the se- lect memory channels only. This is useful to speed up the memory scan interval. Of course, select memory channels are also scanned during normal memory scan.

q Select the memory channel list as described at left. w Push [PBT/M-ch/RIT]momentarily to select the M-

ch/RIT function, if the twin PBT is selected.

• [PBT/M-ch/RIT]indicator (Green) goes out.

e Rotate [M-ch](inner) control to select the desired memory channel.

•All memory channels including blank channels can be selected.

•[Y]/[Z] on the microphone also changes the channels. r Push [F-1SEL] to set the memory channel as a

select memory or not.

t Repeat steps e to r to program another memory

channel as a select memory channel, if desired. y Push [Z(MENU/GRP)] twice to exit the memory

channel list.

Setting select memory channels is also possible in the memory scan indication. (p. 115)

[PBT/M-ch/RIT] switch/[M-ch] (inner) control [PBT/M-ch/RIT] indicator

[MENU/GRP] [F-1]

“ß” appears for select memory channel.

Push [F-1 SEL]

8

DSelecting a memory bank

The IC-7000 has a total of 5 memory banks (99 mem- ory channel each), A to E, are available for usage by group, etc.

Bank indication

q Select the memory channel as described at p. 102. w Push [PBT/M-ch/RIT]momentarily to select the M-

ch/RIT function, if the twin PBT is selected.

• [PBT/M-ch/RIT]indicator (Green) goes out.

e Rotate [RIT] (outer) control to select the desired memory bank.

[MENU/GRP]
[RIT] (outer) control	[F-4]

• Memory channel list indication

q Select the memory channel list as described at left. w Push [F-4BNK] several times to select the desired

memory bank.

•Rotating [RIT] (outer) control also changes the bank.

e Push [Z(MENU/GRP)] twice to exit the memory channel list.

Bank indication

BNK

Push

106