Icom IC-7000 instruction manual Memo pads, Writing frequencies and operating modes into memo pads

8MEMORY OPERATION

■Memo pads

The transceiver has a memo pad function to store fre- quency and operating mode for easy write and recall. The memo pads are separate from memory channels.

The default number of memo pads is 5, however, this can be increased to 10 in initial set mode if desired (p. 134).

Memo pads are convenient when you want to memo- rize a frequency and operating mode temporarily, such as when you find a DX station in a pile-up or when a station is busy for a long time and you want to tem- porarily search for other stations.

Use the transceiver’s memo pads instead of relying on hastily scribbled notes that are easily misplaced.

[MENU/GRP] [F-2] [F-3]

Menu group selection

Push [MENU/GRP] for 1 sec.

Selection from: M, S or G(Graphic)

Menu selection (Example: S)

Push [MENU/GRP] momentarily.				Either
Selection from:	,	or		Y or Z
	S-1 S-2		S-3

DWriting frequencies and operating modes into memo pads

q Select the menu S-3.

w Push [F-2MPW] to program the frequency into a memo pad.

When you write a 6th frequency and operating mode, the oldest written frequency and operating mode are automatically erased to make room for the new set- tings.

NOTE: Each memo pad must have its own unique

combination of frequency and operating mode;

memo pads having identical settings cannot be written.

Displayed frequency and mode

MPW

Push

MP5

Newest

MP4

MP3

MP2

MP1

Oldest

The oldest written frequency and mode are erased.

111