Icom IC-7000 Speech S-Level, Speech Mode Switch, Memopad Numbers, Scan Speed, Scan Resume

SET MODE 13

■Miscellaneous (others) set mode (continued)

24 SPEECH S-Level
You can have frequency, mode and signal level an-		ON		OFF
nouncement. Signal level announcement can be de-		Signal level announcement		No signal level
activated if desired.
		(default)		announcement
When “OFF” is selected, the signal level is not an-
nounced.
25 SPEECH [MODE] Switch
This irem selects the operating mode speech capa-		ON		OFF
bility when [MODE] is pushed.		Operating model announce-		No operating mode an-
When “ON” is selected, the selected operating mode		ment with [MODE]		nouncement with [MODE]
				(default)
is announced at pushing [MODE].
26 Memopad Numbers
This item sets the number of memo pad channels		5		10
available. 5 or 10 memo pads can be set.		5 memo pads		10 memo pads
					13
		(default)
27 SCAN Speed
This item sets the rate at which channels or frequen-		HIGH		LOW
cies are scanned during scan operations. High and		Scan is faster.		Scan is slower.
low can be selected.
		(default)
28 SCAN Resume
This item sets the scan resume function ON and OFF.		ON		OFF
“ON”	: Scan resumes 10 sec. after stopping on	Scan resume	function is	Scan resume function is
		ON. (default)		OFF.
	a signal (or 2 sec. after a signal disap-
	per).
“OFF”	: Scan does not resume after stopping on
	a signal. For the priority watch, setting to
	OFF pauses the watch until the signal
	disappears and scan resumes.
29 MAIN DIAL Auto TS
This item sets the auto tuning step function. When ro-		HIGH	Auto tuning step is turned ON.
tating [DIAL] rapidly, the tuning step automatically			Fastest tuning step during rapid rotation
changes several times as selected.			(default)
There are 2 type of auto tuning steps: HIGH (Fastest)		LOW	Auto tuning step is turned ON.
and LOW (Faster).			Faster tuning step during rapid rotation
		OFF	Auto tuning step is turned OFF.

134