Icom IC-7000 instruction manual Scan Operation, Scan types, Preparation

9SCAN OPERATION

■Scan types

PROGRAMMED SCAN

Repeatedly scans between two scan edge frequencies (scan edge memory channels 1A and 1B).

	Scan
Scan edge 1A or 1B	Scan edge 1B or 1A
	Jump

This scan operates in VFO mode.

PRIORITY WATCH

Checks for signals on a memory while operating on a VFO frequency.

VFO Memory

frequency channel

This scan operates in VFO mode.

MEMORY SCAN

Repeatedly scans all programmed memory channels.

	ß (select)	BLANK
Mch 2	Mch 3	Mch 4
Mch 1 ß (select)		ß (select) Mch 5
Mch 99	Mch 7	Mch 6
ß (select)	ß (select)

This scan operates in memory mode.

SELECTED MEMORY SCAN

Repeatedly scans all selected memory channels.

	ß (select)	BLANK
Mch 2	Mch 3	Mch 4
Mch 1 ß (select)		ß (select) Mch 5
Mch 99	Mch 7	Mch 6
ß (select)	ß (select)

This scan operates in memory mode.

■Preparation

• Channels

For programmed scan: Program scan edge frequen- cies into scan edge memory channels 1A and 1B. (p. 103)

For memory scan: Program 2 or more memory chan- nels except scan edge memory channels.

For memory select scan: Designate 2 or more mem- ory channels as select memory channels—select a memory channel, then push [F-2SEL] in the S-2menu (memory mode) to designate the channel as a select memory channel.

For priority watch: Program 1 memory channel to be watched.

•Scan resume ON/OFF

You can select the scan to resume or cancel when de- tecting a signal, in the miscellaneous (others) set mode, item “SCAN Resume.” Scan resume ON/OFF must be set before operating a scan. See p. 135 for ON/OFF setting and scan resume condition details.

•Scan speed

Scan speed can be selected from 2 levels, high or low, in the miscellaneous (others) set mode. See p. 135 for details.

•Squelch condition

SCAN	PROGRAMMED		MEMORY SCANS
STARTS
		SCAN	PRIORITY WATCH
WITH
	The	scan continues	Scan pauses on each
	until it is stopped man-		channel when the
	ually,	and does not	scan resume is ON;
	pause even if it de-		not applicable when
SQUELCH	tects signals.		OFF.
OPEN	This is not applicable
	when the scan re-
	sume is OFF and a
	programmable step
	(more than 1 kHz) is
	selected.
	Scan stops when detecting a signal.
SQUELCH	If you set scan resume ON in the miscella-
	neous (others)l set mode, the scan pauses for
CLOSED	10 sec. when detecting a signal, then re-
	sumes. When a signal disappears while scan
	is paused, scan resumes 2 sec. later.

113