Icom IC-7000 instruction manual DSP noise reduction p Auto notch filter p

			RECEIVE AND TRANSMIT	4
Convenient functions for receive (continued)
•DSP noise reduction (p. 81)		•Auto notch filter (p. 82)
➥ Push [NR/LEV] to turn the DSP noise reduction		➥ Push [ANF/• REC] to turn the auto notch filter ON
ON and OFF.		and OFF.
•“	” appears when the DSP noise reduction is set to	•“	” appears when the auto notch filter is set to ON.
	ON.
		•VSC (voice squelch control) (p. 84)			4
➥ Push [NR/LEV] for 1 sec. to enter the noise re-
		➥ While “S-1” is selected, push [F-4VSC] to turn
duction level set mode, then rotate [DIAL] to ad-
just the DSP noise reduction level.		the VSC function ON and OFF.
		•“	” appears when VSC function is set to ON.
•Manual notch filter (pgs. 82, 83)
➥ Push [MNF/ADJ] to turn the manual notch filter
ON and OFF.
•“	” appears when the manual notch filter is set to
	ON.
➥ Push [MNF/ADJ] for 1 sec. to enter the manual
notch filter set mode.
•Push [F-2NF1], [F-3NF2] to select the notch filter,
push [F-4NW] to set the filter width, rotate [DIAL] to
set the notch frequency.

DConvenient functions for transmit

•Transmit quality monitor (p. 89)

➥Push [AF(SET)], then [F-4OTH] to enter the mis-

cellaneous (others) set mode. Select an item with [F-1≤]/[F-2≥], then rotate [DIAL] to turn the monitor function ON and OFF.

•VOX (voice operated transmit) (p. 85)

➥While “M-3” is selected, push [F-1VOX] to turn the VOX function ON and OFF.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-3.

•“” appears when the VOX function is set to ON.

➥While “M-3” is selected, push [F-1VOX] for 1

sec. to enter the VOX set mode.

•Push [F-1≤]/[F-2≥] to select an item. •Rotate [DIAL] to set the value/conditions.

58