Icom IC-7000 instruction manual To send/read memory contents, Band stacking register

•Command table (continued)

Command	Sub command		Description
1A	050114	Send/read NR level set
		(0=0 to 15=15)
	050115	Send/read VOX gain (0=0% to
		255=100%)
	050116	Send/read anti VOX gain (0=0% to
		255=100%)
	050117	Send/read VOX delay (0=0.0 sec.
		to 20=2.0 sec.)
	050118	Send/read DTMF speed set
		(0=100	msec.,	1=200 msec.,
		2=300 msec., 3=500 msec.)
	050119	Send/read Break-IN delay set
		(20=2.0d to 130=13.0d)
06		Send/read SSB transmit band-
		width (0=WIDE, 1=MID, 2=NAR)
07		Send/read DSP filter shape
		(0= sharp, 1= soft)
08		Send/read manual notch filter1
		bandwidth
		(0=WIDE, 1=MID, 2=NAR)
09		Send/read manual notch filter2
		bandwidth
		(0=WIDE, 1=MID, 2=NAR)
0A		Send/read 9600 bps mode set
		(0=OFF, 1=ON)
1B	00	Set/read repeater tone frequency
		(see p. 149 for details)
	01	Set/read	TSQL	tone frequency
		(see p. 149 for details)
	02	Set/read DTCS code and polarity
		(see p. 149 for details)
1C	00	Set/read the transceiver’s condi-
		tion (0=Rx; 1=Tx)
	01	Set/read antenna tuner condition
		(0=OFF, 1=ON, 2=Start tuning or
		while tuning)

CW: Clockwise, CCW: Counter Clockwise

CONTROL COMMAND 17

DTo send/read memory contents

When sending or reading memory contents, additional code as follows must be added to appoint the memory channel.

➥Additional code: 0000–0102(0100=P1, 0101=P2, 0102=Call)

DBand stacking register

To send or read the desired band stacking register’s con- tents, combined code of the frequency band and register codes as follows are used.

For example, when sending/reading the oldest contents in the 21 MHz band, the code “0703” is used.

•Frequency band code
Code	Frequency band	Frequency range (unit: MHz)
01	1.8	1.800000–	1.999999
02	3.5	3.400000–	4.099999
03	7	6.900000– 7.499999
04	10	9.900000–10.499999
05	14	13.900000–14.499999
06	18	17.900000–18.499999
07	21	20.900000–21.499999
08	24	24.400000–25.099999
09	28	28.000000–29.999999
10	50	50.000000–54.000000
11	144	144.000000–148.000000
12	430	430.000000–450.000000
13	GENE	Other than above
•Register code
Code	Registered number
01		1 (latest)
02		2
03		3 (oldest)

D Codes for memory keyer contents						17
To send or read the desired memory keyer contents, the
channel and character codes as follows are used.
• Channel code
Code		Channel number
01			M1
02			M2
03			M3
04			M4
• Character’s code
Character	ASCII code		Description
0–9	30–39		Numerals
A–Z	41–5A		Alphabetical characters
space	20		Word space
/	2F		Symbol
?	3F		Symbol
,	2C		Symbol
.	2E		Symbol
^	5E		e.g., to send		, enter ^4254
				BT
✱	2A		Inserts contact number (can be
			used for 1 channel only)

148