Icom IC-7000 instruction manual If filter selection, Select the desired mode. w Select M-1

5FUNCTIONS FOR RECEIVE

■IF filter selection

The transceiver has 3 passband width IF filters for each mode.

For SSB and CW modes, the passband width can be set from 50 to 3600 Hz in 50 or 100 Hz steps. A total of 41 passband widths are available.

For RTTY mode, the passband width can be set from 50 to 2700 Hz in 50 or 100 Hz steps. A total of 32 passband widths are available.

For AM mode, the passband width can be set from 200 Hz to 10 kHz in 200 Hz steps. A total of 50 passband widths are available.

For FM mode, the passband width is fixed and 3 pass- band widths are available.

For WFM mode, the passband width is fixed at 280 kHz.

The filter selection is automatically memorized in

each mode.

The PBT shift frequencies are automatically memo- rized in each filter.

DIF filter selection

[MENU/GRP] [F-3]

q Select the desired mode. w Select M-1.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-1.

e Push [F-3FIL] momentarily several times to se- lect the IF filter 1, 2 or 3.

•The selected filter number is displayed in the LCD. •The filter setting window appears and shows the se- lected passband width and shift frequency. (The filter setting window can be turned OFF in the display set mode. (p. 127)

The IF filter for WFM mode is fixed and cannot be changed.

Selected IF filter

Passband width

Shift frequency

Popup indicator appears

SPCH		TUNER			XFC
/LOCK		/CALL
			V/M		MW
			F-1		F-2
1.8 1	3.5 2		7	3	MODE

10 4 14 5 18 6 FIL FIL

21 7	24 8	28 9	GENE
50 .	144	430	F-INP
	0	CE	ENT

HM-151

77