Icom IC-7000 instruction manual Menu S-3 functions, Menu G-1 Scope functions, Sweep Speed

DMenu S-3 functions

MW	MPW	MPR
F-1	F-2	F-3	F-4

MEMORY WRITE (pgs. 103, 104)

Push and hold for 1 sec. to store the dis- MW played VFO frequency and operating

F-1mode into the selected memory channel.

MEMO PAD WRITE (p. 111)

Push to store the displayed VFO fre-

MPW quency and operating mode into a memo

F-2 pad.

MEMO PAD READ (p. 112)

MPR Push to call up a memo pad.

F-3

✔What is the memo pad function?

The memo pad function stores the frequency and operating mode for easy recall. The memo pads are separate from the usual memory channels. The default number of memo pads is 5, however, this can be increased to 10 in the miscella- neous (others) set mode, if desired. (p. 134)

PANEL DESCRIPTION 1

D Menu G-1 (Scope) functions
				1
SPN	HLD	FIX	SPD
F-1	F-2	F-3	F-4

SWEEP STEPS (pgs. 72, 73)

SPN ➥Push momentarily to change the sweep step size.

F-1	•Available steps are ±10, 25, 50, 100 and 250
	kHz.

➥Push and hold for 1 sec. to change the sweep steps to ±10 kHz.

PEAK HOLD (pgs. 72, 73)

HLD ➥Push to freeze the current simple band scope display.

F-2 •“H” indicator appears while the function is in

use.

➥Push and hold for 1 sec. to clear the peak levels.

•Peak levels are displayed in the background on the simple band scope display. The peak hold function can be disabled in the scope set mode. (p. 73)

FIX/CENTER SELECTION (pgs. 72, 73)

FIX ➥Push to toggle the simple band scope fix mode and center mode.

F-3•Fix mode:

Rotating [DIAL] leaves the marker centered.

•Center mode:

Rotating [DIAL] moves the edge frequencies.

➥While fix mode operation, push and hold for 1 sec. to set the displayed frequency to that of the marker.

SWEEP SPEED

SPD ➥Push momentarily to change the sweep speed between Fast and Slow. (pgs. 72,

F-4 73)

➥Push and hold for 1 sec. to enter the scope set mode. (p. 73)

8