Icom IC-7000 Selecting an operating band, Using the band stacking registers, Band Register

BASIC OPERATION 3

■Selecting an operating band

HM-151

SPCH		TUNER			XFC
/LOCK		/CALL
			V/M		MW
			F-1		F-2
1.8 1	3.5 2		7	3	MODE
10 4	14 5		18 6		FIL
21 7	24 8		28 9		GENE
50 .	144		430		F-INP
		0		CE	ENT

The triple band stacking register provides 3 memories in one band. 3 sets of frequency and operating mode on each band are automatically stored when used.

3

If a band key (on the HM-151) is pushed once, the last used frequency and operating mode are called up. When the key is pushed again, another stored fre- quency and operating mode are called up.

This function is convenient when you operate 3 oper-

Band keys ating modes on one band. For example, one register is used for a CW frequency, another for an SSB fre- quency and the other one for an RTTY frequency.

See the table below for a list of the bands available and the default settings for each band.

BAND	REGISTER 1	REGISTER 2	REGISTER 3
1.8 MHz	1.900000 MHz CW	1.910000 MHz CW	1.915000 MHz CW
3.5 MHz	3.550000 MHz LSB	3.560000 MHz LSB	3.580000 MHz LSB
7 MHz	7.050000 MHz LSB	7.060000 MHz LSB	7.020000 MHz CW
10 MHz	10.120000 MHz CW	10.130000 MHz CW	10.140000 MHz CW
14 MHz	14.100000 MHz USB	14.200000 MHz USB	14.050000 MHz CW
18 MHz	18.100000 MHz USB	18.130000 MHz USB	18.150000 MHz USB
21 MHz	21.200000 MHz USB	21.300000 MHz USB	21.050000 MHz CW
24 MHz	24.950000 MHz USB	24.980000 MHz USB	24.900000 MHz CW
28 MHz	28.500000 MHz USB	29.500000 MHz USB	28.100000 MHz CW
50 MHz	50.100000 MHz USB	50.200000 MHz USB	51.000000 MHz FM
144 MHz	145.000000 MHz FM	145.100000 MHz FM	145.200000 MHz FM
430 MHz	433.000000 MHz FM	433.100000 MHz FM	433.200000 MHz FM
General	15.000000 MHz USB	15.100000 MHz USB	15.200000 MHz USB

DUsing the band stacking registers

[Example]: 14 MHz band

q Push [(14)5], then select a frequency and an oper- ating mode.

SPCH		TUNER			XFC
/LOCK		/CALL
			V/M		MW
			F-1		F-2
1.8 1	3.5 2		7	3	MODE
10 4	14 5		18 6		FIL
21 7	24 8		28 9		GENE
50 .	144		430		F-INP
		0		CE	ENT

1.8 1	3.5 2	7	3	MODE
10 4	14 5	18 6		FIL
21 7	24 8	28 9		GENE
50 .	144	430		F-INP
	0		CE	ENT

•Frequency and operating mode are memorized in the first band stacking register.

w Push [(14)5] again, then select another frequency and operating mode.

•This frequency and operating mode are memorized in the second band stacking register.

e Push [(14)5] again, then select another frequency and operating mode.

•This frequency and operating mode are memorized in the third band stacking register.

HM-151

•When a fourth frequency and operating mode are se- lected on a band, the first register set in step q, is over written.

28