FUNCTIONS FOR RECEIVE

5

 

AGC function

 

 

 

 

 

 

 

 

 

 

The AGC (auto gain control) controls receiver gain to

The FM/WFM modes AGC time constant is fixed as

produce a constant audio output level even when the

‘FAST’ (0.1 sec.) and AGC time constant cannot be

received signal strength is varied by fading, etc.

selected.

 

 

 

The transceiver has 3 AGC characteristics (time con-

 

 

 

 

 

 

 

 

 

 

stant; fast, mid, slow) for non-FM/WFM mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D AGC time constant selection

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

q Select non-FM/WFM mode with [MODE].

 

 

 

 

 

 

 

 

 

 

w Select M-3.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-3.

e Push [F-3AGC] several times to select AGC fast,

[MENU/GRP] [F-3]

AGC medium (MID) AGC slow or AGC OFF.

 

•“

,” “

,” “

” or “

” appears when

 

 

AGC fast, AGC medium (MID), AGC slow or AGC OFF

 

 

is selected, respectively.

 

 

 

” (OFF) appears

when AGC time constant

 

OFF is set with one of FAST, MID, SLOW setting in AGC set mode.

DSetting the AGC time constant

q Select the desired mode other than FM/WFM modes.

w Select M-3.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-3.

e Push [F-3AGC] for 1 sec. to enter the AGC set mode.

r Push one of [F-2 FAST], [F-3 MID], [F-4 SLOW]

to select the desired AGC time constant.

t Rotate [DIAL] to set the desired time constant.

•AGC time constants can be selected between 0.1 to 8.0 sec. (depends on mode) or turned OFF.

•Push and hold [F-2FAST], [F-3MID] or [F-4SLOW] for 1 sec. to select a default value each for fast, mid. and slow, respectively.

y Select another mode other than FM/WFM. Repeat steps r and t, if desired.

•See table to the right for available tone frequencies.

u Push [Z(MENU/GRP)] to exit the AGC set mode.

[MENU/GRP] [F-2] [F-3] [F-4] [DIAL]

•Selectable AGC time constant (unit: sec.)

Mode

Default

Selectable AGC time constant

 

0.3

(FAST)

OFF, 0.1, 0.2, 0.3, 0.5, 0.8, 1.2,

SSB

2.0

(MID)

1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0

 

 

 

 

6.0

(SLOW)

 

 

 

 

 

0.1

(FAST)

OFF, 0.1, 0.2, 0.3, 0.5, 0.8, 1.2,

CW

0.5

(MID)

1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0

 

1.2

(SLOW)

 

 

 

 

 

0.1

(FAST)

OFF, 0.1, 0.2, 0.3, 0.5, 0.8, 1.2,

RTTY

0.5

(MID)

1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0

 

1.2

(SLOW)

 

 

 

 

 

3.0

(FAST)

OFF, 0.3, 0.5, 0.8, 1.2, 1.6, 2.0,

AM

5.0

(MID)

2.5, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0

 

7.0

(SLOW)

 

 

 

 

FM/WFM

0.1

(FAST)

Fixed

 

 

 

 

76

Page 85
Image 85
Icom IC-7000 instruction manual AGC function, AGC time constant selection, Setting the AGC time constant