Icom IC-7000 instruction manual Character’s code for my call, Codes for memory name contents

17 CONTROL COMMAND

DCharacter’s code for my call

Character	ASCII code	Description
0–9	30–39	Numerals
A–Z	41–5A	Alphabetical characters
space	20	Word space
–	2D	Symbol
.	2E	Symbol
/	2F	Symbol

DCodes for memory name contents

To send or read the desired memory name settings, the char- acter codes, instructed codes for memory keyer contents as above, and follows are additionally used.

•Character’s code— Alphabetical characters

Character	ASCII code	Character	ASCII code
a–z	61–7A	—	—

•Character’s code— Symbols

Character	ASCII code	Character	ASCII code
!	21	#	23
$	24	%	25
&	26	¥	5C
?	3F	”	22
’	27	`	60
+	2B	–	2D
:	3A	;	3B
=	3D	<	3C
>	3E	(	28
)	29	[	5B
]	5D	{	7B
}	7D		7C
_	5F	–	7E

@40

DSplit/Duplex frequency setting

The following data sequence is used when sending/reading the split or duplex frequency setting.

	q		w		e	r*
X	0	X	X	0	X	XX
	100 Hz digit: 0 (fixed)			10 MHz digit: 0 (fixed)
		100 kHz digit: 0—9
			10 kHz digit: 0—9		1 MHz digit: 0—4
1 kHz digit: 0—9
						Direction: 00=+ direction 01=— direction

*No need to enter for duplex frequency setting.

DRepeater tone/tone squelch frequency

setting

The following data sequence is used when sending/reading the DTCS code and polarity setting.

	q*			w		e
0		0	X	X	X	X
			100Hz digit: 0–2	10 Hz digit: 0–9		0.1 Hz digit: 0–9
					1 Hz digit: 0–9
Fixed digit: 0*		Fixed digit: 0*

*Not necessary when setting a frequency.

DDTCS code and polarity setting

The following data sequence is used when sending/reading the DTCS code and polarity setting.

	q		w			e
X	X	0		X	X	X
Transmit polarity: 0= Normal	1= Reverse Receive polarity: 0= Normal 1= Reverse
		Fixed digit: 0		1st digit: 0–7	2nd digit: 0–7	3rd digit: 0–7

149