Icom IC-7000 Lock functions, Basic transmit operation, Dial lock function, Transmitting

3BASIC OPERATION

■Lock functions

The lock function can only be activated when display- ing frequency, not in set mode, memory channel list- ing, or TV display.

DDial lock function

The dial lock function prevents accidental change caused by [DIAL].

➥ Push [SPCH/LOCK] for 1 sec. to turn the dial lock function ON and OFF.

•“ ” indicator appears while the dial lock function is activated.

Appears [SPCH/LOCK]

DMicrophone lock function

This function locks microphone keypads.

➥Push [SPCH/LOCK] (microphone) for 1 sec. to toggle the microphone lock function ON and OFF.

•“MIC LOCK ON” and “MIC LOCK OFF,” popup indica- tors appear, respectively

•[PTT] and [SPCH/LOCK] can be used. •All keys on the transceiver can be used.

SPCH	SPCH	TUNER			XFC
/LOCK	/LOCK /CALL
			V/M		MW
			F-1		F-2
	1.8 1	3.5 2	7	3	MODE
	10 4	14 5	18 6		FIL
	21 7	24 8	28 9		GENE
	50 .	144	430		F-INP
		0		CE	ENT

HM-151

■Basic transmit operation

DTransmitting

Before transmitting, monitor your selected op- erating frequency to make sure transmitting won’t cause interference to other stations on the same frequency. It’s good Amateur practice to listen first, and then, even if nothing is heard, ask “is the frequency in use” once or twice, be- fore you begin operating on that frequency.

q Push [PTT] (microphone) to transmit.

• [TX] indicator lights red.

[PTT]

[TX]

SPCH TUNER XFC

/LOCK /CALL

		V/M		MW
		F-1		F-2
1.8 1	3.5 2	7	3	MODE
10 4	14 5	18 6		FIL
21 7	24 8	28 9		GENE
50 .	144	430		F-INP
	0		CE	ENT

HM-151

w Release [PTT] (microphone) to return to receive.

[TX] indicator

37