Icom IC-7000 Repeater tone frequency, Push F-3TON once or twice to turn the tone en- coder on

RECEIVE AND TRANSMIT 4

DRepeater tone frequency

Some repeaters require subaudible tones to be ac- cessed. Subaudible tones are superimposed over your normal signal and must be set in advance. The transceiver has 50 tones from 67.0 Hz to 254.1 Hz.

Each memory channel can store a different subaudi- ble tone frequency.

q Select M-3.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-3.

w Push [F-3TON] once or twice to turn the tone en- coder ON.

•“TONE” appears.

e Push [F-3TON] for 1 sec. to enter the FM tone set mode.

•The selected tone frequency appears.

•Other tone function can be set by pushing [F-1TON].

r Rotate [DIAL] to set the desired subaudible tone frequency.

•See table at right for available tone frequencies.

t Push [Z(MENU/GRP)] to exit the FM tone set mode.

CONVENIENT

Store repeater tone frequencies and ON/OFF settings in memory channels for easy recall. The transceiver’s repeater tone frequency is set to 88.5 Hz by default. This can be changed if desired.

[MENU/GRP] [F-1] [F-3] [DIAL]

•Available tone squelch frequencies						(Unit: Hz)
67.0	085.4	107.2	136.5	165.5	186.2	210.7	254.1
69.3	088.5	110.9	141.3	167.9	189.9	218.1
71.9	091.5	114.8	146.2	171.3	192.8	225.7
74.4	094.8	118.8	151.4	173.8	196.6	229.1
77.0	097.4	123.0	156.7	177.3	199.5	233.6
79.7	100.0	127.3	159.8	179.9	203.5	241.8
82.5	103.5	131.8	162.2	183.5	206.5	250.3

4

64