Icom IC-7000 instruction manual Sending a recorded message, Transmit level setting

VOICE RECORDER FUNCTIONS 7

■Sending a recorded message

qSelect S-1.

w Push [F-1VO] to call up the voice recorder menu.

•If the receive voice memory channels screen appears, push [Z(MENU/GRP)] then push [F-2TX] to select the transmit voice memory channel.

•If the voice root menu appears, push [F-2TX] to select the transmit voice memory menu. The voice recorder starting menu can be changed in the miscellaneous (others) set mode.

[F-1]
[MENU/GRP]	[F-2] [F-3] [F-4]

e Push [F-1T1] — [F-4T4] to transmit the con- tents.

•“T1”– “T4” are highlighted while transmitting.

r Push the selected memory channel key, [F-1T1]

— [F-4T4], again to stop, if desired.

t Push [Z(MENU/GRP)] twice to exit the voice mem- ory screen.

For your information

When an external keypad is connected to the pin 3

and pin 7 of the [MIC] connecter, the recorded

message, T1–T4, can be transmitted without open-

ing the voice recorder set screen. See page 137 for details.

7

DTransmit level setting

q Call up the voice memory recording mode as de- scribed in steps q to w as above.

w Push [Y(MENU/GRP)] to select the voice memory transmit level set mode.

e Push the desired memory channel key, [F-1T1] –

[F-3T3], momentarily to transmit the contents. r Rotate [DIAL] to adjust the transmit voice level.

•Push [F-4DEF] to select the default condition.

t Push [Z(MENU/GRP)] to return to the voice recorder screen.

100