Icom IC-7000 instruction manual DEditing a keyer memory, Programming contents

4RECEIVE AND TRANSMIT

DEditing a keyer memory

The contents of the memory keyer memories can be	•Programming contents
set using the memory keyer edit menu. The memory	q Push [MODE] to select CW mode.
keyer can memorize and re-transmit 4 CW se-	w Select S-1.
quences for often-used CW sentences, contest num-
		•Push and hold [MENU/GRP] for 1 sec. once or twice
ber, etc. Total capacity of the memory keyer is 55		to select the menu group S.
characters per memory channel.		•Push [MENU/GRP] momentarily one or more times to
		select the menu S-1.

	[F-1]
[MENU/GRP]	[F-2] [F-3] [F-4]

Memory channel select

Selected character

• Pre-programmed contents

CH	Contents
M1	CQ TEST CQ TEST DE ICOM ICOM TEST
M2	UR 5NN✽ BK
M3	CFM TU
M4	QRZ?

e Push [F-2KEY] then [Z(MENU/GRP)] to select the keyer root menu.

•If the keyer root menu appears, skip pushing [Z(MENU/GRP)]. The keyer starting menu can be changed in the miscellaneous (others) set mode.

r Push [F-2EDT] to enter the keyer edit menu.

t Push [F-1M1] — [F-4M4] to select the desired keyer memory channel.

y Push [Y(MENU/GRP)] several times to select the de- sired character group ([ABC], [123] or [etc]).

•Selectable characters (with [DIAL]);

Key selection	Editable characters
ABC	A to Z (capital leters)

1230 to 9 (numbers)

etc / ? ^ . , @ ✽

NOTE:

“^” is used to transmit a following word with no

space such as AR. Put “^” before a text string

such as ^AR, and the CW prosign “ AR ” is sent

with no space.

“✱” is used to insert the CW contest number.

The contest number automatically increments

by 1. This function is only available for one

memory keyer channel at a time. Memory keyer channel M2 uses “✱” by default.

u Select the desired character by rotating [DIAL] or by pushing the band key (HM-151) for the incre- menting trigger memory number input.

•Push [F-1Å] or [F-2Ç] for cursor movement. •Push [F-3DEL] to delete the selected character. •Push [F-4SPC] to input a space.

•“✱” is for contact numbers and can be input for the count up trigger channel (“” appears).

i Repeat steps y and u until the desired contents are input.

o Push [Z(MENU/GRP)] to return to memory channel selection mode, then select the next memory chan- nel and repeat steps y and i for character input, if desired.

!0Push [Z(MENU/GRP)] twice to exit the keyer edit mode.

47