Icom IC-7000 instruction manual Transmit frequency monitor check, Auto repeater function

4RECEIVE AND TRANSMIT

DTransmit frequency monitor check

You may be able to receive the other party’s transmit signal directly (called ‘listening on the repeater input’) without having to go through a repeater.

Transmit frequency monitor check (XFC) allows you to check this.

[MENU/GRP] [F-4]

q Select M-1.

•Push and hold [MENU/GRP] for 1 sec. once or twice

to select the menu group M.

•Push [MENU/GRP] momentarily one or more times to select the menu M-1.

w While receiving, push and hold [F-4XFC] to see if you can receive the other party’s transmit signal di- rectly.

•While holding [F-4XFC], the offset direction and fre- quency are displayed above the multi-function key in- dicator.

SPCH	TUNER	XFC	XFC
/LOCK	/CALL

		V/M		MW
		F-1		F-2
1.8 1	3.5 2	7	3	MODE
10 4	14 5	18 6		FIL
21 7	24 8	28 9		GENE
50 .	144	430		F-INP
	0		CE	ENT

HM-151

DAuto repeater function

This function automatically activates the repeater set- tings (DUP– or DUP+ and/or tone encoder ON/OFF) when the operating frequency falls within the general repeater output frequency range and deactivates them when outside of the range.

Set the auto repeater function ON-1 (auto duplex set- ting) or ON-2 (auto duplex setting and activating tone encoder) in the miscellaneous (others) set mode in advance (p. 133). When ON-1 or ON-2 are turned on, repeater settings are automatically activated accord- ing to the table below right.

ON-1 sets the duplex setting and ON-2 sets the du- plex setting and tone encoder automatically.

q Push [AF(SET)] momentarily to enter the set mode menu.

w Push [F-4OTH] to enter the miscellaneous (oth- ers) set mode.

e Push [F-1≤] or [F-2≥] to select “Auto Re- peater.”

r Rotate [DIAL] to select the desired auto repeater condition from ON-1, ON-2 and OFF.

•Push [F-4DEF] for 1 sec. to return to default setting.

t Push [Z(MENU/GRP)] twice to return to the normal operating mode.

[AF]

[MENU/GRP] [F-1] [F-2] [F-4] [DIAL]

•Frequency range and offset direction

FREQUENCY RANGE	DUPLEX DIRECTION
145.200–145.495 MHz	minus duplex
146.610–146.995 MHz	minus duplex
147.000–147.395 MHz	plus duplex
442.000–444.995 MHz	plus duplex
447.000–449.995 MHz	minus duplex

65