Icom IC-7000 Multi-function keys, Menu M-1 functions, Menu M-2 functions, Menu M-3 functions

1PANEL DESCRIPTION

■Multi-function keys

DMenu M-1 functions

SPL A/B FIL XFC

F-1 F-2 F-3 F-4

SPLIT OPERATION

SPL ➥Push momentarily to toggle the split func- tion ON and OFF. (p. 91)

F-1 •“ ” and transmit frequency appear when

the split function is ON.

➥Push and hold for 1 sec. to turn the quick split function ON. (p. 92)

•The offset frequency must be programmed in advance using the miscellaneous (others) set mode. (p. 131)

•The offset frequency is shifted from the dis- played frequency.

•The quick split function can be turned OFF in the miscellaneous (others) set mode. (p. 131)

VFO A/B SELECTION

➥Push momentarily to exchange the trans-

A/B	mit VFO and receive VFO contents. (p.
F-2	27)

➥Push momentarily to toggle the transmis- sion VFO and reception VFO during split operation. (p. 91)

➥Push momentarily to toggle the transmit and receive frequencies (and modes) of memory channels when the split function is turned ON.

➥Push and hold for 1 sec. to equalize the frequency and operating mode of the two VFO’s.

•The lower indicated frequency and operating mode are equalized to the upper (indicated) VFO frequency and operating mode.

FILTER SELECTION (p. 77)

	FIL	➥Push momentarily to select one of three
	F-3	IF filter settings.
		➥Push and hold for 1 sec. to enter the filter
		set mode.
TRANSMIT FREQUENCY CHECK (pgs. 65, 91)
	XFC	Monitors the transmit frequency when
	F-4	pushed and held.
		•While pushing this key, the transmit fre-
		quency can be changed with [DIAL].

DMenu M-2 functions

MEM	MW	MCL	V/M
F-1	F-2	F-3	F-4
MEMORY MENU (p. 105)
MEM	Push momentarily to indicate the memory
	frequency and modes.

F-1•Memory list indication is available.

MEMORY WRITE (pgs. 103, 104)

	MW	Push and hold for 1 sec. to store the se-
		lected readout frequency and operating
	F-2
		mode into the displayed memory channel.
MEMORY CLEAR (p. 108)
	MCL	Push and hold for 1 sec. to clear the se-
		lected memory channel contents.
	F-3	•“	” appears.

VFO/MEMORY SELECTION

➥Push momentarily to toggle VFO and

V/M memory modes. (pgs. 27, 102)

F-4➥Push and hold for 1 sec. to transfer the selected memory channel to the currently displayed VFO. (p. 109)

DMenu M-3 functions

DURING SSB OPERATION:

VOX COM AGC TBW

F-1 F-2 F-3 F-4

DURING CW OPERATION:

BRK	1/4	AGC
F-1	F-2	F-3	F-4

DURING RTTY OPERATION:

1/4 AGC

F-1 F-2 F-3 F-4

DURING AM OPERATION:

VOX AGC

F-1 F-2 F-3 F-4

5