Icom IC-7000 ∂TX function, Rotate RIT outer control to shift the transmitter frequency

FUNCTIONS FOR TRANSMIT 6

■∂TX function

The ∂TX function shifts the transmit frequency up to ±9.999 kHz in 1 Hz steps (10 Hz steps when can- celling the 1 Hz step readout) without moving the re- ceive frequency.

q Push [PBT/M-ch/RIT]momentarily to select the M- ch/RIT function, if the twin PBT is selected.

• [PBT/M-ch/RIT]indicator (Green) goes out.

w Push [PBT/M-ch/RIT]for 1 sec. to enter the RIT/∂TX mode.

e Push [F-2∂TX] to turn the ∂TX function ON.

•“” indicator and the frequency shift appear and [PBT/M-ch/RIT]indicator lights orange when the func-

tion is ON.

r Rotate [RIT] (outer) control to shift the transmitter frequency.

•The receive frequency is not shifted.

t To reset the ∂TX frequency, push [F-3CLR] for 1 sec.

•Push [F-3CLR] momentarily to reset the RIT fre- quency when “Quick RIT/∂TX Clear” in the miscellaneous (others) set mode is ON. (p. 135)

y To cancel the ∂TX function, push [F-2∂TX] mo- mentarily again.

•“ ” indicator disappears.

u Push [Z(MENU/GRP)] to exit the RIT/∂TX mode.

When RIT and ∂TX are ON at the same time,

[RIT] (outer) control shifts both the transmit and re-

ceive frequencies from the displayed frequency at the same time.

[PBT/M-ch/RIT] switch

[RIT] (outer) [PBT/M-ch/RIT] indicator

[MENU/GRP] [F-2] [F-3]

Push for 1sec.

Push

Rotate

Appear

Push

Reset to “0.00k”

6

•Calculate function

The frequency shift of the (RIT or) ∂TX function can be added/subtracted to the displayed frequency.

While displaying the (RIT and/or) ∂TX shift fre- quency, push and hold ([F-1RIT] or) [F-2∂TX] for 1 sec.

Push and hold

•Practical example

When you find a DX station on 21.025 MHz/CW and the station is picking up stations transmitting slightly up from 21.025 MHz.

q Push [F-1RIT] and [F-2∂TX] to turn both the

RIT and ∂TX functions ON.

w Rotate [RIT] (outer) to find the DX station’s re- ceive frequency.

e When you find the DX station’s receive frequency, push [F-1RIT] to turn the RIT function OFF.

•Now you can transmit the DX station’s receive fre- quency and receive the DX station’s transmit fre- quency (21.025 MHz).

r Start transmitting while the station is standing by.

88