Playing the recorded contents | Icom IC-7000 manual

VOICE RECORDER FUNCTIONS

7

DOne-touch voice recording

To record the receiving signal contents immediately, one-touch voice recording is available.

q Push and hold [ANF/• REC] for 1 sec. while re- ceiving a signal to start recording.

• “” blinks.

•Records audio into the new track.

w Push and hold [ANF/• REC] for 1 sec. again to stop recording.

•Recording is automatically terminated after 120 sec. or when a total of the recorded time becomes 1500 sec.

Blinks

[ANF/•REC]

7

■Playing the recorded contents

	q Select S-1.
	w Push [F-1VO] to call up the voice recorder menu.
	•If the transmit voice memory channels (T1–T4) screen
	appears, push [Z(MENU/GRP)] then push [F-1RX] to
	select the receive voice memory channel.
	•If the voice root menu appears, push [F-1RX] to select
	the receive voice memory menu. The voice recorder
	starting menu can be changed in the miscellaneous	[MENU/GRP] [F-1] [F-2] [F-3]
	(others) set mode.	[MENU/GRP] [F-1] [F-2] [F-3]
	(others) set mode.

e Push [F-1≤] or [F-2≥] to select the desired recorded contents, then push [F-3PLY] to play- back.

•“” appears.

r Push [F-3PLY] again to stop playback, if desired.

•Playback is terminated automatically when all of the recorded contents in the channel are played.

t Push [Z(MENU/GRP)] twice to exit the voice recoder mode.

96

Image 105

Icom IC-7000 instruction manual Playing the recorded contents

Contents

I7000 Shock may occur Word Definition RwarningEquipment damage may occur Risk or personal injury, fire or electric Illustrations Power Indicator Programmable Function Keys F-1/F-2 7MAIN Dial Dial 8RECEIVE/TRANSMIT Indicators RX/TXFront panel Microphone HM-151 Precautions Table of Contents Hz tone burst ……………………………… Transmit ﬁlter width setting SSB only ………SSB/CW/RTTY/AM only …………………… NR Level …………………………………… From the TNC ………………………………… Operation………………………………………… AH-4 operation ……………………………… General ………………………………………… Transmitter……………………………………… Specifications ………………………… Panel Description Panel Description Twin PBT M-ch/RIT Indicator Pgs , 79, 88MENU/GROUP Keys MENU/GRP p TUNER/CALL KEY TUNER/CALL 2SPCH/LOCK KEY SPCH/LOCK 1AUTO NOTCH/VOICE Recorder KEY ANF/ REC4UP/DOWN Band Keys YBAND/ZBAND 7MAIN Dial Dial @2FUNCTION Display 9TUNING Step KEY TS pgs Menu M-1 functions Multi-function keysMenu M-2 functions Menu M-3 functions FM Tone Operation Function Menu S-2 functions Menu S-1 functionsDtmf Operation Select Scan Menu S-3 functions Menu G-1 Scope functionsSweep Speed ⁄1VFO/MEMORY Selection V/M Power Indicator⁄2TRANSMIT Frequency Check XFC ⁄3TUNER/CALL KEY TUNER/CALL Microphone Connector Information Microphone connector Rear panel ACC socket Data socket Function display When connecting the ACC conversion cable OPC-599Frequency Readout Meter Readouts Appears when the 12 dB attenuator is Appears when the preamp is on@01/4 Function Indicator 7MULTI-FUNCTION Screen Unpacking Installation and ConnectionsSelecting a location Antenna connection Stand InstallationFront panel separation Front panel mounting Required connections HM-151Ground p Spea KER p Advanced connectionsRemot E p 4 p Used for computer control and transceive Operation Power supply connections Connecting a DC power supplyBattery connections External antenna tuners Connecting the AH-4 Linear ampliﬁer connections Connecting the IC-PW1/EUROMHz linear ampliﬁer OPC-599 conversion cable For no break-in operation Connections for CW ACC Rtty EXT SP When connecting to ACC socket When connecting to Data socketWhen connecting to MIC connector Connections for packet Initial settings When ﬁrst applying power CPU resettingMenu resetting M-1 Basic Operation VFO Mode Differences between VFO and memory modeVFO description Example VFO operation Selecting VFO/memory modeSelecting VFO A/VFO B VFO equalization Using the band stacking registers Selecting an operating bandBand Register Tuning with the main dial Frequency settingDirect frequency entry with the microphone’s keypad Push F-INP/ENT Rotate Dial for normal tuning, if desired Programmable tuning stepPush TS momentarily to turn the programmable tuning step on Selecting kHz step Selecting 1 Hz or 10 Hz step SSB/CW/RTTY only MHz quick tuning step FM/WFM/AM only Select M-3 ⁄4 tuning function CW/RTTY only Auto tuning step function Volume settingPush ZMENU/GRP twice to return to the normal operating mode Push ZMENU/GRP twice to return the normal op- erating mode Voice synthesizer function Operating mode selection When setting as RF gain/squelch control Setting OperationWhen functioning as squelch control RF gain is Squelch and receive RF sensitivity Multi-function meter Meter functionQuick entry Select S-1 Basic transmit operation Lock functionsDial lock function Microphone lock function Setting output power Setting microphone gainBand SSB/CW Receive and Transmit Operating SSBConvenient functions for receive Convenient functions for transmit IC-7000 Tuning FCC ChannelAbout 5 MHz band operation USA version only Transmit quality monitor p Set CW setting in the keyer set mode S-1 Operating CW0Stop keying to return to receive ⁄4 function p Push P.AMP/ATT momentarily to turn the pre- amp on or OFFBreak-in function p Memory keyer function p While M-3 is selected, push F-1BRK one or CW reverse mode Push ZMENU/GRP to exit the quick set modeCW side tone function CW pitch control Electronic CW keyer Pre-set characters can be sent using the memory Memory keyer send menuSelect S-1 Push F-2KEY to enter the keyer send menu DEditing a keyer memory Programming contents Setting the contact serial number Contest number set modeNumber Style Count UP Trigger Setting the electronic keyer Keyer set modeKeyer Repeat Time Dot/Dash Ratio Paddle operation from MIC connector Keyer set mode Rise TimePaddle Polarity Keyer Type Operating Rtty FSK Transmit a Send signal from your TNCDisplay the Rtty decoder screen Rotate Dial to simultaneously tune a desired sig- nal Convenient functions for receive Rtty reverse mode Twin peak ﬁlterMode Function for the Rtty decoder indication Setting the decoder threshold level Rtty decode set mode Rtty Decode UsosRtty Decode New Line Code Mark frequency Pre-setting for using Rtty terminal or TNCRotate Dial to select the desired frequency Shift width Operating AM Push NR/LEV to turn the DSP noise reduction DSP noise reduction p Auto notch ﬁlter p Preamp and attenuator p DSP noise reduction p Operating FMAmp on or OFF On and OFF While M-3 is selected, push F-1 VOX to turn Push F-3TON for 1 sec. to enter the FM tone set mode Push Mode one or more times to select FM mode Select M-3Tone squelch operation Rotate Dial to set the desired subaudible tone frequency Tone scan operation Push ZMENU/GRP to exit the FM tone set mode Dtcs operation Push F-3TON once or twice to turn the Dtcs function onAvailable tone codes Repeater operation One-touch repeater functionPush F-3TON to turn the repeater tone on Push F-3TON once or twice to turn the tone en- coder on Repeater tone frequency Transmit frequency monitor check Auto repeater functionFrequency range and offset direction Storing a non standard repeater Turn the auto repeater function OFF in the miscelSelect M-2 Dtmf send menu Dtmf memory encoder Programming a Dtmf code Push Mode to select FM mode. w Select S-1Dtmf speed Push F-2DTM then ZMENU/GRP to select the Dtmf root menu TV channel operation Push and hold Afset for 1 sec. to turn the TV mode onRotate M-chinner control to select the desired TV channel Rotate AF to set a suitable audio level Skip channel setting Rotate Dial to adjust the channel frequency Channel frequency adjustmentPush ZMENU/GRP to exit the channel frequency set mode Push F-3SET to set the channel frequency Fix mode Functions for ReceiveSimple band scope Scope set mode Center modePush F-3FIX momentarily to select the center mode Select G-1 Scope Max Hold Preamp and attenuatorScope Size Fast Sweep To cancel the RIT function, push F-1RIT mo- mentarily again To reset the RIT frequency, push F-3CLR for 1 secRIT function Calculate function AGC function Setting the AGC time constantAGC time constant selection Selectable AGC time constant unit sec If ﬁlter selection If ﬁlter for WFM mode is ﬁxed and cannot be changedIf ﬁlter selection Select the desired mode. w Select M-1 Select SSB, CW, Rtty or AM mode FIlter passband width setting SSB/CW/RTTY/AM onlyPush F-3FIL for 1 sec. to enter ﬁlter set mode If fIlter shape SSB/CW only PBT Operation Example Twin PBT operation Noise blanker Noise blanker set modeNB Level NB Width Noise reduction set mode Noise reductionNR Level Notch function Mode While in CW and Rtty modes, push MNF/ADJAuto notch function This transceiver has auto and manual notch func Manual notch function Manual notch ﬁlter set mode Voice squelch control function Erating modeMeter peak hold function Push ZMENU/GRP twice to return to normal op Adjusting the VOX function Functions for TransmitVOX function VOX set mode VOX Gain Transmit ﬁlter width setting SSB onlyVOX Delay Anti-VOX Break-in function Break-in delay settingSemi break-in operation Full break-in operation To cancel the ∂TX function, push F-2∂TX mo- mentarily again To reset the ∂TX frequency, push F-3CLR for 1 sec∂TX function Rotate RIT outer control to shift the transmitter frequency Speech compressor Monitor function Comp Level Compression level settingSelect Comp meter Select S-1 Push F-3MET one or more times to select the Comp meter Select VFO a and set the frequency to 21.290 MHz USB Split frequency operationDirect Shift Frequency Input Push F-1SPL M-1 on the transceiver’s front panel Quick split function Menu selection Example M-1Push F-INP/ENT,, 5 then F-1 SPL M-1 Quick split setting Split offset frequency settingErating mode Rotate Dial to set the desired split offset Menu selection Example S-1 Measuring SWRSpot measurement Plot measurement Digital voice recorder Voice Recorder FunctionsRecording a received audio Basic recording Playing the recorded contents Erasing the recorded contents Recording Recording a message for transmitPush F-3REC again to stop recording Push ZMENU/GRP twice to exit the voice mem- ory screen Spaces can be used. See the step t below Programming a memory name for transmitInput the desired character by rotating Dial Push ZMENU/GRP to input and set the name Sending a recorded message Transmit level settingSelect S-1 Push F-1VO to call up the voice recorder menu Push F-1T1 F-4T4 to transmit the con- tents Voice set mode Voice set mode Auto MonitorMIC Memo Memory channels Memory OperationMemory channel selection Memory Transfer Over Channel Capability Clear Set the desired frequency and operating mode in VFO mode Programming in VFO modeMemory programming Rotate M-chto select the desired memory chan- nel Set the desired frequency and operating mode Programming in memory mode Memory channel list Selecting a memory channel using the memory channel list Setting a memory channel as a select memory Selecting a memory bankMemory channel list indication Editing programming memory names Memory names Memory clearing using the memory channel list Memory clearingTo return to VFO mode, push F-4V/M again Transferring in VFO mode Frequency transferringSelect a memory channel with M-ch Push F-4V/M momentarily to select the VFO mode Transferring in memory mode Writing frequencies and operating modes into memo pads Memo pads Calling up a frequency from a memo pad Scan Operation Scan typesPreparation Memory scan operation Programmed scan operation Priority watch Select memory scan operation Antenna Tuner Operation Manual tuningOptional AT-180 Automatic Antenna Tuner operation Tuner operation PTT tune function AH-4 operation Adjusting the transmit signal output from the TNC Adjusting the data speedPacket Operation Packet operation Time set mode Clock and Timers Setting the current year Setting the current dateSetting the current time Auto power OFF activity Clock2 offset settingSet the desired power-off time using Dial Push ZMENU/GRP twice to exit timer set mode Set mode description SET Mode SSB TBW Wide L SSB mode Quick set modeMode Set mode item Default setting RF Power RF Power all modes SSB TBW MID L SSB mode SSB TBW Wide H SSB modeSSB TBW MID H SSB mode SSB TBW NAR L SSB mode Side Tone Level Limit CW mode Side Tone Level CW modeTwin Peak Filter Rtty mode Rtty Mark Frequency Rtty mode Display set mode Display Font Type 12 1Hz Mode PopupDisplay Font Size Meter Peak Hold TV Popup P.AMP/ATT TV Popup CH Up/DownVoice TX Name Display Keyer Memory Display Push ZMENU/GRP twice to exit the set mode screen Power on CheckMy Call Opening screen example Miscellaneous others set mode Quick Split RF/SQL ControlSplit Offset DUP Offset HF DUP Offset 430M DUP Offset 144MOne Touch Repeater Auto Repeater Tuner PTT Start Tuner SwitchVsend Select Speech Level Speech S-Level Speech Mode SwitchMemopad Numbers Scan Speed 30 HM-151 F-1 34 SSB/CW Synchronous Tuning31 HM-151 F-2 MIC Up/Down Speed Mode Select CW Mode Select SSBMode Select Rtty CW Normal Side Mode Select FM Mode Select AMMode Select WFM External Keypad Voice Front Keypad Type REF AdjustCI-V Baud Rate CI-V Address Fuse replacement MaintenanceMemory backup Cleaning Est Icom Dealer or Service Center Troubleshooting Transmit Display Scan Problem Possible Cause Solution MB-106CARRYING Handle Option Units Setting Connector information for ACC2 socket AT-180 internal switch descriptionAT-180 inside top cover Speciﬁcations for the AT-180 Command table Control CommandRemote jack CI-V information CI-V connection example Control Command 146 147 To send/read memory contents Codes for memory keyer contentsBand stacking register Split/Duplex frequency setting Codes for memory name contentsRepeater tone/tone squelch frequency Setting Dtcs code and polarity setting General Specifications MB-62 Options OPC-1443 OPC-1444OPC-589 Menu Guide Main menu group Sub menu groupGraphic menu group Set mode description Memo Memo Intended Country of Use