Icom IC-7000 instruction manual Display set mode

SET MODE 13

■Display set mode

To adjust the LCD contrast or backlight, wait until

the LCD becomes stable (10 min. or more after turn-

ing power ON). This is an inherent characteristic of

LCDs and LCD backlights and does not indicate a transceiver malfunction.

1 Contrast (LCD)

This item adjusts the contrast of the LCD from 0% to 100% in 1% steps.

40%

40% (default)

2 Bright (LCD)

This item adjusts the brightness of the LCD from 0% 70%

to 100% in 1% steps. 70% (default)

3 LCD Unit Bright

This item adjusts the brightness of the LCD unit from 40%

0% to 100% in 1% steps. 40% (default)

13

4 LCD Flicker

This item adjusts the flicker of the LCD from 0% to 100% in 1% steps.

Icom recommends using the default value. But if

you feel the flicker on the LCD, and it is too con- cerned, you adjust this item.

65%

65% (default)

5Backlight(Switches)

This item adjusts the brightness of the switches from 0% to 100% in 1% steps.

50%

50% (default)

6 Display Type

This item sets the LCD screen type. There are 3 se- lectable types: A, B, and C.

A

A-type LCD screen (default)

126