Display
Playback
Other problems
| Trouble |
| Action |
| The LCD monitor is | • The LCD monitor may be difficult to see if used in bright areas | |
| |||
| difficult to see. |
| such as under direct sunlight. |
|
| • Fully charge the battery, run it down, and then recharge it again. | |
| The remaining battery | • If the camcorder is used for long periods of time in high or low | |
| display is not correct. |
| temperatures, or if the battery is repeatedly charged, the amount |
|
|
| of remaining battery may not be displayed correctly. |
| Sound or video are | • Sometimes playback is interrupted at the connecting section | |
| interrupted. |
| between two scenes. |
|
| • Select [PLAYBACK OTHER FILE] then search the video on the | |
|
|
| index screen. |
| Cannot find a recorded |
| (Video fi les that have damaged management information can be |
|
| played back.) | |
| video/image. | • Cancel group display and date search functions. | |
|
| • Change the setting in [VIDEO SLOT SELECTION] or [IMAGE | |
|
|
| SLOT SELECTION]. (Files on other media are not displayed.) |
|
| • Slide the mode switch to select the desired mode (! or #). | |
| The camcorder operates | • | If there are many files (such as video) in the camcorder, it takes |
| slowly when switching |
| time for the camcorder to respond. It is recommended that you |
| between video mode |
| copy all files from the camcorder onto your computer, and erase |
| and still image mode, |
| the fi les from the camcorder. |
| or when switching the |
|
|
| power on or off. |
|
|
|
| • | Check the remaining battery charge. |
|
| • | (When the battery is fully charged, the lamp does not fl ash.) |
| The lamp does not flash | When recharging in either a hot or cold environment, ensure that | |
| during battery charging. |
| battery is being charged within the permitted temperature range. |
|
|
| (If the battery is being recharged outside the permitted |
|
|
| temperature range, recharging may stop to protect the battery.) |
|
|
| |
| When connecting to | • When connecting to the HDMI cable, the image or sound may | |
| the HDMI cable, the |
| not appear on the TV properly depending on the TV connected. |
| image or sound does |
| In such cases, perform the following operations. |
| not appear on the TV |
| 1) Disconnect the HDMI cable and connect it again. |
| properly. |
| 2) Turn off and on the camcorder again. |
|
| • TVs may operate differently depending on the specifi cations, | |
| not work properly, and |
| even if they are |
| the TV does not work |
| CEC functions of the camcorder cannot be guaranteed to |
| in conjunction with the |
| operate in combination with all the TVs. In such cases, set |
| camcorder. |
| [HDMI CONTROL] to [OFF]. |
|
|
|
|
ENGLISH
FURTHER INFORMATION
45
